Fried Corn Bugle Chips Extruder Machines-manufacture,factory,supplier from China

The automated fried snack manufacturing line makes powdered uncooked substances which includes corn flour into  fried snack through the method of blending,extruding,frying,flavoring and cooling. the same production line can produce fried snacks of numerous patterns and sizes. at the equal time, the identical  fried snack may be matched with precise device manufacturing lines in keeping with precise capability.

Advantages of Twin Screw Square Barrel ExtruderTwin-screw square barrel extruders are mainly used to produce various snacks and foods. Including puffed snacks, fried snacks, artificial rice, macaroni, etc.

IntroductionSecondary extrusion technology is a common food production process, mainly used in the production of various puffed foods, such as edible puffed potato chips, shrimp chips, squid rolls, puffed pea crisps, etc. The principle is to destroy the starch granules under high temperature and high pressure, so that the food can expand rapidly. The following is a brief introduction to the specific process of secondary extrusion.process flow1. Raw material preparation  First of all, high-quality raw materials need to be selected.

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Daily Troubleshooting of Twin-screw ExtruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

Decryption of Large Twin-Screw Extruder1.Principle and working processThe large twin-screw extruder is an important piece of equipment in the food processing industry and plays an indispensable role in the food production process. This article will reveal the principles, applications and advantages of large-scale twin-screw extruders, and let us explore this eye-catching industrial device together.2. ExtruderThe large twin-screw extruder uses advanced extrusion technology to process ingredients under high temperature and high pressure. It is mainly composed of two rotating screws.